
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X650-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X650-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, letting you dial back the nominal 650 mm travel to a precise 575-650 mm window during commissioning. Standard variable air cushions at both ends absorb kinetic energy, while the extruded aluminum barrel provides dual sensor grooves.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops when fine-tuning end positions. The rear adjuster acts purely as a mechanical travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series. It supports a subset of ISO 15552 mounts (Basic, FA, LB, TC, FTC, TCM1, TCM2) and operates at speeds of 30-800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 575-650 mm end-stop during product size changeovers without swapping out the entire cylinder.
Fine-tune the retract position at commissioning to align tooling perfectly, using the rear screw rather than external shims.
Adjust the travel window on a packaging line diverter to handle varying package lengths on the fly.
If you need higher force, stepping up to the 40 mm bore yields 628 N at the same pressure. The SAIJ32X650-75 is ideal for machine changeovers where the effective stroke must be varied without replacing the actuator.
Because this cylinder features a 650 mm stroke, the 12 mm rod requires external guidance to prevent excessive side-loading and premature seal wear. When specifying an ISO 15552 replacement, match the 32 mm bore, 650 mm stroke, 75 mm adjustment, PT tapered port thread, and the standard non-magnet configuration. For load-holding without live air, use an external rod lock or pilot-operated check valve, as the rear adjuster is not a brake.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from 650 mm down to as little as 575 mm. It only sets the travel end and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.