
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X650-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X650-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
Equipped with a magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise position detection. The carbon steel rod and M10x1.25 thread offer robust performance, while the rear adjuster acts purely as a travel stop for end-position tuning, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract stroke from 575 to 650 mm during commissioning to achieve exact positioning without machining new hard stops.
Quickly adapt machinery for different product sizes by adjusting the rear stopper screw, minimizing downtime between production runs.
The adjustable stroke is ideal for machine setup and product changeover, allowing you to fine-tune the end position at commissioning rather than swapping a fixed-stroke SAI cylinder. For load-holding without live air pressure, select a SAIL or BSAI cylinder instead.
Because the 650 mm stroke is relatively long, the 12 mm carbon steel rod will experience higher side-load stresses; always use an external guide to prevent binding. This SAIJ model is dimensionally interchangeable per ISO 15552 and features a PT tapered port thread, supporting Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting options.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 650 mm down to 575 mm. This creates a 75 mm adjustable window for fine-tuning end positions without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.