verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X70-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke70 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$60.91 $68.41Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20

The AirTAC SAIJ32X70-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 70 mm nominal stroke, yielding a usable travel window of 50 to 70 mm. This built-in adjustment allows you to trim the retract position by up to 20 mm during commissioning without swapping cylinders or adding external stops.

This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch placement. It operates at speeds of 30-800 mm/s and uses a G1/8 port with a 12 mm carbon steel rod. The variable air cushions at both ends handle end-of-stroke deceleration, while the rear adjuster acts purely as a mechanical stop and does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X70-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20 Is Used

tune

Machine Changeover

Dial in the 50-70 mm travel window during product size transitions to set precise retract positions without machining new stop blocks.

settings_input_component

Sensor Calibration Setup

Leverage the dual sensor grooves to mount CMSE or DMSE switches while adjusting the rear screw to find the exact trigger point.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20 the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring variable end stops or product-size changeovers, giving you a 50-70 mm travel window to dial in. For load-holding without continuous air pressure, this cylinder is insufficient as the adjuster is only a stop, so consider an AirTAC SAIL or BSAI locking cylinder. When replacing an ISO 15552 cylinder, match the 32 mm bore, 70 mm stroke, 20 mm adjustment, PT port thread, and standard carbon steel rod. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.

The rear adjuster screw allows you to shorten the effective stroke from its 70 mm nominal length down to 50 mm. This creates a 50-70 mm usable travel window for fine-tuning the end position at commissioning, acting as a mechanical stop rather than a load lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X70-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.