
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X70-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X70-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 50 to 70 mm. The integrated -S magnet enables direct position sensing using AirTAC CMSE reed or DMSE electronic switches seated in the dual-side sensor grooves.
Instead of machining external stopper blocks during product changeovers, you can fine-tune the retract end-position using the built-in 20 mm adjustment screw. This cylinder uses a PT tapered port thread and a 12 mm carbon steel rod. Remember that the rear adjuster acts strictly as a travel stop and does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 50-70 mm retract position during format changes without machining new external stopper blocks.
Fine-tune the end of stroke on light-duty assembly stations to accommodate minor variations in component height.
Quickly adapt diverter strokes on a packaging line by turning the rear adjuster to match new carton dimensions.
The adjustable stroke is perfect for machine setups requiring variable end stops without swapping cylinders, whereas a fixed SAI cylinder is better for rigid, repeatable stops. For load-holding without continuous air pressure, select a SAIL or BSAI model instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 70 mm nominal stroke, 20 mm adjustment range, PT port thread, and the -S magnet requirement. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR brackets.
Quick checklist
The rear adjusting screw lets you trim the effective stroke back by up to 20 mm, creating a usable travel window of 50 to 70 mm from the 70 mm nominal stroke. It acts as a mechanical stop and does not hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.