
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X70-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X70-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 40 to 70 mm usable travel window, allowing you to dial back the 70 mm nominal stroke by up to 30 mm during machine commissioning without adding external stops.
Equipped with a 12 mm carbon steel rod and M10x1.25 threading, this compact unit handles standard pneumatic duty. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It features variable air cushions at both ends to decelerate the piston smoothly across its 30 to 800 mm/s speed range.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact retract distance within the 40-70 mm window during machine setup to align tools perfectly without swapping cylinders.
Quickly adapt the stroke end-position on a packaging line when running a new product size by turning the rear adjustment screw.
Push or pull light 402 N loads into exact fixtures, relying on the built-in mechanical stop to guarantee consistent downstream placement.
Choose this 32 mm bore when an application requires precise end-position tuning within a 40-70 mm travel window. The rear adjuster acts purely as a mechanical stop to set the retract position; it does not hold the load without live air pressure. For true load-holding, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 70 mm stroke, 30 mm adjustment range, PT tapered port thread, and standard carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR variants. Since the stroke is under 300 mm, side-load concerns are minimal, but external guides are recommended if the load is heavy or off-center.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw lets you trim the effective travel back by up to 30 mm, creating a 40 to 70 mm usable stroke window. This stopper sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.