
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X70-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X70-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 40 to 70 mm, allowing you to dial back the 70 mm nominal stroke by up to 30 mm during machine commissioning.
This variant features a carbon steel piston rod and PT tapered port threads (G1/8). The -S magnet option enables position sensing with AirTAC CMSE reed or DMSE electronic solid-state switches fitted into the dual sensor grooves on the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to set the end-of-travel position and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact end-of-stroke position within a 40-70 mm window during initial machine build without machining new hard stops.
Quickly adapt the retract distance on a packaging line when switching to a slightly shorter product variant.
Select this 32 mm bore model when you need precise end-position tuning without swapping cylinders or adding external stops. Conversely, if you need less force and a smaller footprint, you would step down. The adjustable travel window here is particularly useful for product size changeovers on a line.
Because the nominal stroke is only 70 mm, an external guide is unnecessary for side-load support, though the 12 mm rod and M10x1.25 thread handle standard light loads well. Remember that the rear stopper and air cushions decelerate the stroke but do not function as a lock. For true load-holding without live air, consider the SAIL or BSAI series. To match this cylinder for an ISO 15552 replacement, specify: 32 mm bore, 70 mm stroke, 30 mm adjustment, PT G1/8 port, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting, and a -S magnet.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 70 mm nominal stroke down to as little as 40 mm. This provides a 40-70 mm usable window for fine-tuning the retract end position at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.