verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X70-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke70 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$63.70 $71.20Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S

The AirTAC SAIJ32X70-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 70 mm nominal stroke, yielding a usable travel window of 30 to 70 mm. This wide adjustment range allows you to dial in the exact retract end-position during commissioning without swapping hardware. The carbon steel rod pairs with a PT tapered port thread for reliable sealing.

You can mount AirTAC CMSE reed or DMSE electronic switches directly into the sensor grooves machined on both sides of the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to set the travel limit and does not hold the load without continuous air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S Is Used

tune

Machine Changeover

Quickly reposition the retract stop within the 30-70 mm window when switching between product sizes on a packaging line.

precision_manufacturing

End-Position Tuning

Fine-tune the exact retract distance during commissioning without adding external stops or machining new mounting plates.

settings_input_component

Sensor-Driven Sorting

Utilize the integrated magnet with DMSE electronic sensors to confirm the adjusted position of small parts handling actuators.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S the Right Cylinder?

Choose this 32 mm bore when an application requires precise end-position tuning within a 30 to 70 mm window. If your setup needs less than 30 mm of total travel, stepping down to a smaller fixed-stroke SAI cylinder avoids excessive adjuster protrusion. Because the nominal stroke is 70 mm, external side-load guides are less critical than on longer strokes, but the 12 mm rod still requires reasonably aligned mounting.

An adjustable stroke is preferred over a fixed cylinder when machine formats change frequently, letting you reposition the retract stop on the fly. For true load-holding without live air pressure, this cylinder is insufficient since the adjuster is a stop, not a lock; consider an SAIL pneumatic lock or external rod lock instead. To match this ISO 15552 interchangeable unit, specify the 32 mm bore, 70 mm stroke, 40 mm adjustment, PT port thread, and the -S magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S FAQ

At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.

The rear adjuster allows you to shorten the 70 mm nominal stroke by up to 40 mm, creating a usable travel window of 30 to 70 mm. It functions as a mechanical stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X70-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.