
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X70-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X70-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 20 to 70 mm. The integrated -S magnet allows for precise position detection using AirTAC CMSE reed or DMSE solid-state sensors housed in the dual-side barrel grooves.
This adjustable model uses a PT tapered port and a 12 mm carbon steel rod with an M10x1.25 thread, offering a robust interface for small-frame applications. The rear stopper mechanism lets you dial in the exact retract distance during commissioning without adding bulky external stops, while the standard adjustable air cushions at both ends manage end-of-stroke deceleration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 20 to 70 mm retract distance on packaging machines during product size transitions without swapping the cylinder.
Fine-tune the final end-stop during commissioning to compensate for mechanical tolerance stack-up in small assembly jigs.
Use the rear adjuster to set precise variable stroke limits for testing and feeding operations that require flexible travel.
Conversely, if you need less force and a smaller footprint, dropping to a smaller standard SAI fixed-stroke cylinder might suffice, but you would lose the on-the-fly stroke tuning capability.
This SAIJ32X70-50-S is dimensionally interchangeable per ISO 15552 and features a PT port, carbon steel rod, and an -S magnet for CMSE / DMSE sensors. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster acts only as a travel stop; it will not hold a load without live air pressure, so for fail-safe load holding, consider an external rod lock or the AirTAC SAIL series.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf of push force.
The rear adjuster screw lets you shorten the 70 mm nominal stroke by up to 50 mm, creating a usable travel window of 20 to 70 mm. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.