
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. With a 700 mm nominal stroke and a 10 mm adjustment range, it provides a 690-700 mm usable travel window for precise commissioning without adding external stops.
This model uses a standard carbon steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic sensors later if position feedback becomes necessary. The rear adjuster acts strictly as a travel stop to set deceleration, not as a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 690-700 mm end position during commissioning to perfect a long-traverse assembly pick-and-place without machining external stop blocks.
Quickly shorten the retract stroke by up to 10 mm on a packaging line when handling slightly shorter product lengths, minimizing downtime between runs.
Execute a 700 mm transfer task with a 32 mm bore, using the built-in rear stopper to absorb final impact energy and set the precise resting datum.
Choose this 32 mm bore when you need precise end-stop tuning over a long 700 mm travel. The adjustable rear screw is ideal for product changeovers where the exact end position varies slightly, saving the hassle of swapping a fixed-stroke SAI cylinder.
Because this cylinder lacks a magnet for sensors and uses a PT tapered port, ensure your fittings match. For any stroke of 700 mm, the 12 mm rod can still experience side-loading forces; always use an external guide to prevent rod binding. If the machine requires the load to be held in place without live air pressure, this adjuster will not lock the load—consider an external rod lock, a pilot-operated check valve, or the AirTAC SAIL pneumatic lock cylinder instead.
Quick checklist
The cylinder has a 700 mm nominal stroke, but the external rear adjusting screw lets you shorten the effective travel by up to 10 mm. This creates a 690-700 mm adjustable window, allowing you to fine-tune the retract end position at commissioning or during product changeovers without replacing the cylinder.
The pull force is 345 N at 0.5 MPa due to the 12 mm carbon steel piston rod taking up piston area.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.