verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke700 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$115.14 $122.64Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100

The AirTAC SAIJ32X700-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 600 to 700 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

This model uses a 12 mm carbon steel rod with an M10x1.25 thread and a PT G1/8 port. It features adjustable air cushions at both ends to decelerate the payload smoothly. Remember that the rear adjuster functions strictly as a travel stop for end-position tuning, not as a lock to hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X700-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke700 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100 Is Used

settings_input_component

End-Stop Tuning

Dial in the exact retraction point within the 600-700 mm window during machine commissioning to accommodate varying product sizes without external stops.

conveyor_belt

Changeover Adjustment

Quickly reposition the rear travel limit on a packaging line when switching to a different carton length, saving setup time.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100 the Right Cylinder?

Choose this adjustable-stroke cylinder when you need to dial in a precise end-of-stroke position during machine setup or product changeover without physically swapping the cylinder or adding external stop blocks.

Because the 700 mm stroke is relatively long for a 32 mm bore, the unsupported rod is susceptible to side-loading; an external guide is recommended to prevent premature wear. For a direct ISO 15552 replacement, match the 32 mm bore, 700 mm stroke, 100 mm adjustment, PT G1/8 port, and standard mounting options (Basic, FA, LB, TC, FTC, TCM1, TCM2). If you need fail-safe load holding without live air, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100 FAQ

If you operate at 0.7 MPa, the push force increases to 563 N.

The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 100 mm, creating a usable travel window of 600 to 700 mm. It only sets the end position and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X700-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.