
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the effective travel by up to 100 mm. This yields a usable stroke window of 600 to 700 mm, giving you precise control over the retract end-position during commissioning or product changeover without needing external stops.
Because this is a 700 mm stroke, the 12 mm rod requires careful alignment to manage side loads; an external guide is recommended for heavy or off-center payloads. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet option pairs directly with AirTAC CMSE reed and DMSE electronic sensors for position feedback. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 600 and 700 mm during machine setup to accommodate varying product lengths without swapping hardware.
Quickly adjust the stroke back by up to 100 mm on a packaging line when switching to a smaller package format, saving commissioning time.
Use the 700 mm travel to move a workpiece across a station, fine-tuning the final end-position to match sensor feedback for precise alignment.
If your application requires less travel, stepping down to a 32 mm fixed-stroke SAI cylinder avoids unnecessary barrel length. The SAIJ series uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
This model is dimensionally interchangeable per ISO 15552. It features PT tapered ports sized G1/8. Remember that the rear adjuster is a stop, not a lock; for load-holding without live air pressure, consider the SAIL or BSAI series instead.
Quick checklist
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjusting screw lets you shorten the 700 mm nominal stroke by up to 100 mm, creating a 600 to 700 mm usable travel window. The adjuster acts as a mechanical stop to fine-tune the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.