
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 690-700mm usable travel window, allowing you to trim the effective stroke by up to 10mm during commissioning.
This variant includes a magnetic piston for position sensing with CMSE reed or DMSE solid-state switches. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting. Its M10x1.25 carbon steel rod handles moderate loads, though long 700mm strokes require external guidance to prevent side-load damage.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 690-700mm travel window during machine commissioning to achieve exact positioning without swapping cylinders.
Quickly adjust the retract end-position by up to 10mm on the rear screw to accommodate slight variations in product sizes.
The 10mm adjustable end-stop is perfect for dialing in exact end positions without adding external stops, unlike a fixed-stroke SAI cylinder. Remember, the rear adjuster is a travel stop, not a lock—this cylinder cannot hold loads without live air pressure.
When matching ISO 15552 dimensions for replacement, verify the 700mm stroke, 10mm adjustment range, PT tapered port threads, and the -S magnet option. Because the 700mm stroke is long and the 12mm rod is relatively slender, always use an external guide to support the rod and prevent binding.
Quick checklist
The maximum operating pressure is 1.0MPa.
A rear adjusting screw acts as an external stopper, allowing you to shorten the 700mm nominal stroke by up to 10mm, creating a 690-700mm travel window. This stopper only limits travel; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.