
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 680 to 700 mm, allowing you to dial back the nominal 700 mm stroke by up to 20 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
This adjustable model uses a reduced mounting set comprising Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some variants. The rear stopper mechanism lets you fine-tune the retract end position without swapping out the entire cylinder or adding external stops. Because the adjuster acts purely as a travel stop and not a lock, it will not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 680-700 mm travel window during product size transitions to set exact retract positions without hardware swaps.
Use the 20 mm rear stopper to fine-tune the end-of-stroke position during initial machine setup rather than machining custom spacers.
Adjust the retract distance on the fly for flexible tooling layouts that require slight positional shifts during operation.
If your setup needs less force, stepping down is an option, but stepping up to a 40 mm bore yields 628 N. The adjustable 680 to 700 mm window is perfect for product changeovers where exact end-stops vary slightly. For a fixed end position without the adjusting screw, the standard SAI series is sufficient. If you need true load-holding without continuous air pressure, consider the SAIL or BSAI locking cylinders instead.
With a 700 mm stroke, the 12 mm rod is highly susceptible to side-loading; an external guide rail is strongly recommended to prevent premature seal wear. This unit features a PT tapered port thread and no internal magnet. It is dimensionally interchangeable per ISO 15552 standards, ensuring straightforward replacement of comparable profile cylinders without relying on tie-rod construction.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the nominal 700 mm down to 680 mm. It sets the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.