
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 680-700 mm usable travel window, allowing you to dial back the nominal 700 mm stroke by up to 20 mm during commissioning. The integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE solid-state sensors fitted into the dual-side sensor grooves.
This model features a PT tapered port thread and a 12 mm carbon steel rod with an M10x1.25 thread. Because the 700 mm stroke is lengthy for this bore size, the rod assembly is susceptible to side-loading; an external guide is recommended to prevent premature seal wear. The rear adjuster acts purely as a mechanical stop to fine-tune the end position and does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 680 to 700 mm end-position during commissioning without machining external stopper blocks.
Quickly adjust the retract stroke by up to 20 mm to handle different package lengths on a packaging line.
Use the rear stopper screw to fine-tune the final retract position on long-stroke assembly fixtures.
Choose this 32 mm bore if your application requires less force than the 40 mm class (which provides 628 N at 0.5 MPa) but still needs a long reach. An adjustable stroke is ideal for machines that process varying product sizes, letting you shift the end-stop without swapping cylinders or adding external stops. For load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster and air cushions only decelerate travel.
To replace an ISO 15552 cylinder, match the 32 mm bore, 700 mm stroke, 20 mm adjustment range, PT port thread, and -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Given the 700 mm stroke, ensure your mounting choice supports the rod adequately against sag and side-load.
Quick checklist
The nominal stroke is 700 mm, but the rear adjuster allows you to shorten the effective stroke by up to 20 mm. This creates a 680-700 mm adjustable travel window for fine-tuning end positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.