
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 670 to 700 mm usable travel window, allowing you to dial back the nominal 700 mm stroke by up to 30 mm during commissioning.
This variant includes a standard carbon steel piston rod and a magnetic piston (-S) for direct mounting of AirTAC CMSE reed or DMSE electronic solid-state sensors along the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to set the retract end-position and is not a lock; the cylinder cannot hold a load without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 670-700 mm retract position on the fly when switching product sizes on a packaging line, avoiding the need to physically swap cylinders.
Fine-tune the final resting position of a long-stroke actuator during initial commissioning to perfectly align a pick-and-place head.
Adjust the retract distance of a sorting gate to accommodate varying package lengths without reprogramming the PLC cycle.
Choose this 32 mm bore cylinder when you need precise end-position tuning without adding external stops or swapping components on a machine changeover. Conversely, if you need a fixed travel length and want to eliminate the adjustment screw, the standard SAI series is the direct alternative.
Because this unit features a 700 mm stroke, the 12 mm diameter carbon steel rod will experience leverage forces under side-loading; an external guide rail is recommended to prevent rod binding over this long unsupported travel. This SAIJ model uses a PT tapered port thread and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It is dimensionally interchangeable per ISO 15552.
Quick checklist
The SAIJ32X700-30-S features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke from 700 mm down to a minimum of 670 mm. This provides a 30 mm tuning window for precise end-position setting during commissioning. Note that this adjuster is a stop, not a lock, and the cylinder requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.