
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the rear adjustment screw, you can trim the nominal 700mm travel back by up to 40mm, creating a precise 660-700mm usable window for exact end-position tuning at commissioning.
This -S variant includes a magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches fitted into the dual-side barrel grooves. The adjuster acts purely as a mechanical stop to set the retract end, not as a load-holding lock; for position holding without live air pressure, consider the SAIL or BSAI series. It supports PT porting and a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 660-700mm window when switching between product sizes on a packaging line.
Fine-tune the final position during machine commissioning without adding external physical stops or shims to the fixture.
Adjust the push-back distance of a sorting gate to handle varying package lengths on the fly.
If your application requires greater force, stepping up to the 40mm bore yields 628N at 0.5 MPa. To match an ISO 15552 replacement exactly, specify the 32mm bore, 700mm stroke, 40mm adjustment, PT port, and the -S magnet option.
Because the 700mm stroke is long relative to the 32mm bore, the 12mm rod will experience higher side-load stresses if the load is unsupported. An external guide is strongly recommended to prevent rod bending and premature seal wear. The standard speed range is 30-800 mm/s.
Quick checklist
The rear adjuster screw lets you shorten the 700mm nominal stroke by up to 40mm, providing a usable travel window of 660-700mm. It acts as a mechanical stop to fine-tune the end position without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.