verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke700 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$115.14 $122.64Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50

The AirTAC SAIJ32X700-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By integrating a 50mm adjustment mechanism at the rear end, this unit provides a usable travel window of 650 to 700mm, allowing operators to dial in the exact retract position without physically swapping the cylinder or adding external stops.

This model features a PT tapered G1/8 port and relies on variable air cushions at both ends to manage kinetic energy. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. Because the 700mm stroke is relatively long for a 32mm bore, the 12mm rod diameter dictates that external load guiding is necessary to prevent excessive side-loading and premature seal wear.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X700-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke700 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50 Is Used

tune

Product Size Changeovers

Quickly fine-tune the 650-700mm retract position during format changes on packaging lines without disassembling the cylinder mount.

precision_manufacturing

Long-Stroke Positioning

Handles 700mm travel for pushing or lifting tasks where the exact end-of-stroke contact point must be dialed in precisely at commissioning.

factory

Machine Setup Calibration

Allows maintenance teams to set variable end-stops on the fly during initial machine build, absorbing minor mechanical tolerances in the frame.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50 the Right Cylinder?

The 50mm adjustment range is particularly valuable for machines processing varying product sizes, as the retract end-stop can be fine-tuned on the fly during changeovers rather than repositioning hard mechanical stops.

As a dimensionally interchangeable per ISO 15552 cylinder, this model matches standard mounting footprints but uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options. It operates at speeds between 30 and 800 mm/s. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the AirTAC SAIL or BSAI series instead. For strokes of 300mm or more, always use an external guide to support the load and prevent side-load damage to the rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50 FAQ

At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf. The operational speed range is 30-800 mm/s.

The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 50mm, creating a usable travel window of 650 to 700mm. It allows fine-tuning of the end position without swapping the cylinder, but it is a stop, not a lock, and will not hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X700-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.