
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 650 to 700 mm. The extruded aluminum barrel features sensor grooves on both sides for straightforward position feedback.
Because the rear adjuster acts purely as a mechanical stop, it allows precise end-position tuning during commissioning without adding external stops. It is not a locking device and requires live air to hold a load. For true load-holding without pressure, consider the related SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 650 to 700 mm retraction point during machine commissioning without swapping out the entire cylinder body.
Quickly adapt the travel end for different package sizes on a packaging line by turning the rear adjustment screw.
If your setup requires higher force, stepping up to the 40 mm bore yields 628 N. The SAIJ configuration is ideal for variable product changeovers, whereas a fixed SAI cylinder suits constant travel. This -S variant includes a magnet for CMSE reed and DMSE electronic sensors.
At a 700 mm stroke, the 12 mm rod is highly susceptible to side loads; always use an external guide rail to prevent rod binding and premature seal wear. When replacing an ISO 15552 cylinder, match the 32 mm bore, 700 mm stroke, 50 mm adjustment, PT port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.
Quick checklist
The rear adjuster lets you shorten the effective stroke by up to 50 mm, providing a usable travel window of 650 to 700 mm. It acts as a mechanical stop to fine-tune the end position and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.