
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By integrating a rear stopper screw, this model allows you to dial back the nominal 700 mm travel by up to 75 mm, creating a precise 625-700 mm usable window for fine-tuning end positions during commissioning.
This adjustable variant uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR options. The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes a magnet (-S), it is fully compatible with AirTAC CMSE reed and DMSE solid-state sensors. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 625 to 700 mm end-position during machine commissioning without machining new hard stops.
Quickly adapt the cylinder's travel window on packaging lines when handling slightly different carton lengths.
Use the 75 mm rear adjustment screw to fine-tune the retract stroke and absorb mechanical tolerances on the line.
An adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops for product changeovers without physically swapping the cylinder or adding external stops. To replace an ISO 15552 cylinder, match the 32 mm bore, 700 mm stroke, 75 mm adjustment, PT tapered port threads, and the -S magnet requirement.
Because this cylinder features a 700 mm stroke, the 12 mm rod requires external guidance to prevent excessive side-loading and premature wear. For load-holding without live air pressure, this plain SAIJ adjuster will not suffice—consider an AirTAC SAIL or BSAI locking cylinder instead.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you shorten the 700 mm nominal stroke by up to 75 mm, providing a usable travel window of 625 to 700 mm. It functions as a travel stop, not a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.