
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X75-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X75-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 65-75 mm usable travel window.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. It uses a G1/8 port, an M10x1.25 rod thread, and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X75-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 65-75 mm travel window during product size changes to set exact end positions without adding external mechanical stops.
Fine-tune the end-stop at commissioning to absorb minor mechanical tolerances, ensuring precise 402 N placement thrust.
Use the 10 mm rear adjustment screw to shorten the effective stroke on the fly, preventing overtravel in delicate clamping tasks.
The rear adjuster screw acts purely as a travel stop to trim the stroke and cannot hold the load without live air; for true load-holding, select an SAIL or BSAI cylinder.
When replacing an ISO 15552 cylinder, match the 75 mm stroke, 10 mm adjustment range, PT tapered port thread, and standard carbon steel rod. Since the stroke is under 300 mm, side-load stress on the 12 mm rod is minimal, but external guiding remains recommended for lateral forces.
Quick checklist
The rear adjuster screw allows you to trim the nominal 75 mm stroke back by up to 10 mm, creating a 65-75 mm usable travel window. This stopper only limits travel; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.