
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X75-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X75-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 55-75 mm usable travel window, letting you dial back the 75 mm nominal stroke by up to 20 mm during commissioning.
This model incorporates a 12 mm carbon steel rod with an M10x1.25 thread, offering robust resistance to side loads for its size. It uses a PT tapered port and relies on a variable air cushion at both ends to decelerate the piston. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X75-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 55-75 mm travel window during initial machine commissioning to hit exact positioning targets without swapping cylinders.
Quickly adjust the retract end-stop on a packaging line when switching between product sizes, saving downtime on physical modifications.
If your application requires less force, stepping down is an option, but if you need significantly more thrust, a 40 mm bore provides 628 N. The rear adjuster acts solely as a mechanical stop to set the retract position; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
This SAIJ32X75-20 is dimensionally interchangeable per ISO 15552 standards. It features a PT port thread, a standard carbon steel rod, and no magnet. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is under 300 mm, an external guide is less critical, though the 12 mm rod still handles side loads well within its capacity.
Quick checklist
It can reach up to 724 N at 0.9 MPa.
The rear adjusting screw lets you shorten the 75 mm nominal stroke by up to 20 mm, creating a 55-75 mm usable travel window. It acts as a physical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.