
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X75-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X75-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 45-75 mm usable travel window, allowing you to trim the 75 mm nominal stroke back by up to 30 mm.
This adjustable stopper lets you fine-tune the retract end position during commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement. It uses a PT tapered port thread, and the 12 mm carbon steel rod with an M10x1.25 thread handles basic loads, though longer unsupported strokes will still need an external guide.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X75-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 45-75 mm window during machine commissioning to achieve perfect alignment without machining new hard stops.
Quickly adjust the stroke by up to 30 mm on a packaging line when handling slightly different product sizes, minimizing downtime between batches.
Provide precise pressing or clamping force in a compact 32 mm bore footprint, trimming the stroke back to prevent over-travel on delicate components.
The SAIJ32X75-30 is selected over a fixed-stroke SAI cylinder when a machine requires variable end-stops or easy product changeover.
Because this is a 75 mm stroke, side-load risks are minimal, but always ensure the load is guided to prevent rod binding. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-load holding, use an external rod lock or pilot-operated check valve. This model is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 30 mm, providing a usable travel window of 45 to 75 mm. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.