
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X75-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X75-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 75 mm stroke that can be fine-tuned down by up to 30 mm, giving you a precise 45-75 mm usable travel window.
This variant includes a magnet for position sensing and uses a PT tapered port thread. The extruded aluminum barrel features sensor grooves on both sides, allowing you to easily mount AirTAC CMSE reed or DMSE electronic solid-state switches exactly where needed. The standard carbon steel rod offers reliable durability for general industrial automation.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X75-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 45-75 mm travel window during format changes on packaging lines, using the rear screw to set new end positions rapidly without changing the cylinder.
Precisely tune the retraction point during machine setup to accommodate varying part sizes, ensuring delicate components are pressed accurately every cycle.
Leverage the dual sensor grooves and built-in magnet to mount CMSE or DMSE switches, confirming the adjusted end-of-travel position for automated feedback.
Choose this 32 mm bore adjustable cylinder when you need exact end-position tuning at commissioning without swapping components or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series.
To match this ISO 15552 interchangeable cylinder, specify the 32 mm bore, 75 mm stroke, 30 mm adjustment range, PT port thread, and the -S magnet option. It supports the reduced SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. With a 12 mm rod and M10x1.25 thread, it handles standard loads well within its 30-800 mm/s speed range.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 75 mm nominal stroke by up to 30 mm. This creates a 45-75 mm usable travel window for fine-tuning end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.