
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X75-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X75-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 25 to 75 mm, allowing you to dial back the 75 mm nominal stroke by up to 50 mm during machine commissioning.
This extruded aluminum barrel design includes sensor grooves on both sides for CMSE reed or DMSE electronic switches if a magnet is added later. The rear stopper functions strictly as a travel end-limit and deceleration point, not a load-holding lock. For position retention without live air pressure, consider an external pilot-operated check valve or the SAIL lock series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X75-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 25-75 mm travel window during initial commissioning to perfectly align end-of-stroke positions without changing hardware.
Quickly adapt the cylinder stroke on automated lines handling varying product sizes by dialing back the rear stopper screw.
Apply 402 N of precise push force at 0.5 MPa for small component insertion, benefiting from the adjustable end-stop for depth control.
If you need less force, dropping to a 20 mm bore (if available in the broader catalog) or a different series might be more efficient, while stepping up to a 40 mm bore yields 628 N at the same pressure. The SAIJ32X75-50 is selected over a fixed SAI when product changeovers require variable end-stops without physically swapping the cylinder or bolting on external stops.
This model features PT tapered ports (G1/8) and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the adjuster only sets the travel end, never use it to hold a load; use a SAIL or BSAI cylinder for fail-safe locking. The 75 mm stroke is short enough that side-load stress on the 12 mm rod is minimal, but external guidance is always recommended for heavy lateral loads.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the 75 mm nominal stroke by up to 50 mm, creating a usable travel window of 25 to 75 mm. This stopper only limits travel; it does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.