verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X750-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke750 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$124.45 $131.95Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100

The AirTAC SAIJ32X750-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 750 mm stroke that can be dialed back by up to 100 mm, yielding a precise 650-750 mm usable travel window for fine-tuning retract end positions during commissioning.

This model utilizes variable air cushions at both ends to manage deceleration over the long travel distance. The extruded aluminum barrel includes sensor grooves on both sides, allowing for the direct mounting of CMSE reed or DMSE electronic switches if a magnet is specified later. The rear adjuster acts purely as a mechanical stop to set the travel end, meaning it does not hold the load without continuous live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X750-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke750 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×750Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100 Is Used

conveyor_belt

Product Changeover

Dial in the 650-750 mm retract position on packaging lines when handling different carton sizes, avoiding the need to physically swap out cylinders or add external stopper blocks.

tune

Commissioning Calibration

Fine-tune the end-of-stroke position during machine setup to perfectly time tooling engagement, using the 100 mm rear adjustment screw to dial in the exact 750 mm nominal travel.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100 the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers without swapping the cylinder. To match this cylinder for an ISO 15552 replacement, verify the 750 mm stroke, 100 mm adjustment range, PT tapered port thread, and mounting choice from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Because this cylinder features a 750 mm stroke, the 12 mm rod and M10x1.25 thread will be subjected to increased side-load leverage if the load is unsupported. An external guide mechanism is highly recommended to prevent rod binding and premature seal wear. For any load-holding requirements without live air pressure, this cylinder is insufficient; consider an AirTAC SAIL pneumatic lock or an external rod lock instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100 FAQ

At the maximum 1.0 MPa pressure, it can output up to 82 kgf.

The rear adjuster screw allows you to shorten the effective stroke from the nominal 750 mm down to 650 mm. It functions as a mechanical travel stop to set the exact end position, but it is not a lock and will not hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X750-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.