
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X750-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X750-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 710 to 750 mm usable travel window, allowing you to dial back the nominal 750 mm stroke by up to 40 mm during commissioning without adding external stops.
This 32 mm bore unit uses a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. It includes variable air cushions at both ends (27 mm cushion length) and dual-side sensor grooves. The mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X750-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 710-750 mm travel window during machine commissioning to dial in exact retract distances without swapping cylinders.
Quickly adjust the rear stopper to accommodate different product sizes on a packaging line, saving setup time.
Set precise retract limits on conveyor sorting mechanisms where the physical stop needs occasional adjustment.
Choose this adjustable-stroke model when your machine setup requires variable end stops or product changeover flexibility, rather than a fixed-stroke SAI cylinder. The rear adjuster acts purely as a travel stop to set deceleration; it does not hold the load without live air. For load-holding without pressure, consider an external rod lock or the SAIL series.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 750 mm stroke, 40 mm adjustment, PT tapered port thread, and the required mounting accessory. Because the 750 mm stroke is long for a 32 mm rod, an external guide is recommended to prevent excessive side-loading and rod deflection.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you shorten the effective travel from 750 mm down to 710 mm. This creates a 40 mm adjustable window for fine-tuning the end position without using external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.