verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke80 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$63.24 $70.74Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10

The AirTAC SAIJ32X80-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 70-80 mm, letting you shorten the 80 mm nominal stroke by up to 10 mm without adding external stops.

This unit uses a carbon steel piston rod and PT G1/8 tapered ports. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop for end-position tuning, meaning it will not hold a load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X80-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10 Is Used

tune

Machine Changeover

Dial in the 70-80 mm travel window during product size transitions to set new retract positions without physically replacing the cylinder.

settings_input_component

End-Stop Tuning

Use the 10 mm rear adjuster to precisely set the retract end-position during initial commissioning, avoiding external stopper blocks.

precision_manufacturing

Variable Positioning

Achieve exact clamping or ejection distances on automated lines by trimming the stroke back from the 80 mm nominal length.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10 the Right Cylinder?

Choose this 32 mm bore adjustable-stroke model when your application requires fine end-position tuning during commissioning or product changeover, avoiding the need to swap a fixed-stroke SAI cylinder.

For a direct ISO 15552 replacement, match the 32 mm bore, 80 mm stroke, 10 mm adjustment, PT G1/8 port, and standard carbon steel rod. Because the nominal stroke is under 300 mm, side-load stress is minimal, though the 12 mm rod diameter means external guidance is still recommended for heavy lateral loads. Note that the SAIJ mounting set omits FB, CA, CB, and CR options, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10 FAQ

At 0.7 MPa, the push force increases to 563N.

The rear adjuster allows you to shorten the 80 mm nominal stroke by up to 10 mm, creating a 70-80 mm usable travel window. The adjuster functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X80-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.