
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X80-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 60 to 80 mm, allowing you to shorten the effective stroke by up to 20 mm without adding external stops.
This model features a carbon steel piston rod and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors. The rear adjuster acts purely as a mechanical stop to set the travel end; it does not lock or hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 60-80 mm travel end during product size transitions on a packaging line without swapping out the entire cylinder.
Fine-tune the retract position during machine commissioning using the rear screw, eliminating the need to machine custom external spacers.
Adjust the actuation distance of a lightweight conveyor sorting gate to accommodate varying package widths on the fly.
Choose this adjustable-stroke model when your application requires fine end-position tuning at commissioning or frequent product changeovers, rather than relying on a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, this cylinder is insufficient; consider the SAIL pneumatic-lock or BSAI clamp-lock series instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 80 mm nominal stroke, 20 mm adjustment range, PT port, and desired mounting accessory. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR brackets. Because the 80 mm stroke is relatively short, side-load stress is minimal, though the 12 mm rod diameter handles moderate guide loads well.
Quick checklist
The rear adjuster allows you to mechanically shorten the effective stroke by up to 20 mm, creating a usable travel window of 60 to 80 mm. It functions as a hard stop for the retract position and does not lock the load in place when air pressure is removed.
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.