
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X80-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in rear stopper allows you to trim the 80mm nominal stroke back by up to 30mm, creating a precise 50-80mm usable travel window for product changeovers without swapping the cylinder.
This 32mm bore unit features a PT tapered port and a 12mm carbon steel rod with an M10x1.25 thread. Because the adjuster acts solely as a mechanical stop and the cylinder relies on variable air cushions at both ends for end-of-travel deceleration, it cannot hold a load without live air pressure. For position holding, an external pilot-operated check valve or a related SAIL lock cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 50-80mm travel window during product size transitions on a packaging line, using the rear adjuster to set exact end positions without replacing hardware.
Fine-tune clamping reach during machine commissioning, utilizing the 30mm adjustment range to compensate for mechanical tolerances in the fixture build.
Provide adaptable travel limits for automated assembly stations, allowing operators to quickly modify the 80mm stroke endpoint for varying component heights.
Choose this adjustable-stroke model when your fixture requires fine end-position tuning at commissioning or frequent product-size changes, avoiding the need to bolt on external stops or buy a fixed-stroke SAI cylinder.
As an ISO 15552 profile cylinder, it ensures dimensional interchangeability across standard mounting interfaces. This specific SKU includes a magnetic piston (-S) for position sensing, operating seamlessly with AirTAC CMSE reed switches and DMSE solid-state electronic sensors installed in the dual-side barrel grooves. The approved mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 80mm nominal stroke by up to 30mm, providing a usable travel window of 50-80mm. It only sets the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.