
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X80-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 40-80 mm usable travel window by retracting the nominal 80 mm stroke up to 40 mm, allowing precise end-position tuning at commissioning.
This model uses a PT G1/8 tapered port and relies on 27 mm variable air cushions at both ends to decelerate the load. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a mechanical stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 40-80 mm travel window during commissioning to perfect end positions without machining external stoppers.
Quickly adapt the cylinder stroke on packaging lines when handling different product sizes, reducing downtime.
Fine-tune the retract stroke on testing fixtures to accommodate varying part dimensions accurately.
The 40 mm adjustment range is perfect for product changeovers, eliminating the need to swap cylinders or bolt on external stops. If your setup requires less force, stepping down is an option, but if you need higher force, consider the 40 mm bore which provides 628N at the same pressure.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 80 mm stroke, 40 mm adjustment, PT G1/8 port, and standard carbon steel rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the rear screw is a travel stop and not a lock, any load-holding requirements without live air should use an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the nominal 80 mm stroke by up to 40 mm, creating a 40-80 mm usable travel window. It functions as a mechanical stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.