
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X80-40-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, allowing you to fine-tune the end position during commissioning. It provides a usable travel window of 40 to 80 mm, letting you dial back the nominal 80 mm stroke by up to 40 mm without adding external stops.
This variant includes a piston magnet for position sensing and uses a PT tapered port thread. The extruded aluminum barrel features sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE solid-state switches. The rear adjuster acts purely as a mechanical travel stop for deceleration and positioning, meaning it will not hold a load safely without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 40 to 80 mm travel window to accommodate new product lengths on a packaging line without swapping out the entire actuator.
Fine-tune the retract stroke precisely during machine commissioning to perfect alignment and avoid costly mechanical hard-stops.
Dial in the exact retraction point for pick-and-place operations requiring flexible material handling distances.
Choose this 32 mm bore adjustable cylinder when your equipment requires variable end-stops for frequent product size changeovers, rather than relying on a fixed-stroke SAI cylinder. Because this model features a 12 mm rod and M10x1.25 thread, it handles moderate side loads, but any long unsupported travel still requires an external guide.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. To match this configuration exactly, select a 32 mm bore, an 80 mm stroke, a 40 mm adjustment range, PT ports, and a magnet for sensors. Note that SAIJ uses a reduced mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. For load-holding requirements without live pressure, consider an SAIL or BSAI cylinder instead.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the nominal 80 mm down to 40 mm, providing a 40 to 80 mm usable stroke window. It functions as a mechanical stop and does not lock the load without live air pressure.
At the maximum operating pressure of 1.0 MPa, the push force reaches 801 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.