
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X80-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end-of-travel position. With a nominal 80 mm stroke and a 50 mm adjustment range, it provides a highly versatile usable travel window of 30 to 80 mm. This makes it ideal for applications requiring exact end-position tuning during commissioning without the need to swap out the entire cylinder.
Equipped with a standard carbon steel piston rod and PT tapered port threads, this unit includes a magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic solid-state sensors. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting. It utilizes a reduced mounting interface set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets. The standard variable air cushions at both ends help decelerate the load, but remember the rear adjuster acts only as a travel stop, not a lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 30 to 80 mm travel window during product changeovers without swapping hardware or adding external mechanical stops.
Fine-tune the retract end-position during commissioning to perfectly seat parts, compensating for mechanical tolerances on the fly.
Quickly adapt a packaging line for varying carton sizes by turning the rear adjuster screw to shorten the effective stroke.
The 50 mm adjustment range on an 80 mm stroke is particularly useful for product-size changes on a conveyor line, allowing operators to dial in the exact 30 to 80 mm travel window on the fly. For holding loads safely without live air pressure, this cylinder is insufficient; the rear screw stopper and air cushions only set the travel end, so you would need to specify a SAIL (air-released lock) or BSAI (clamp-lock) cylinder, or use an external pilot-operated check valve.
To match this ISO 15552 dimensionally interchangeable cylinder for a replacement, verify the 32 mm bore, 80 mm stroke, 50 mm adjustment, PT tapered port thread, and the -S magnet option. The standard carbon steel rod and TPU seals handle ambient temperatures from -20 to +70 C. Since the 80 mm stroke is well under the 300 mm side-load threshold, external guide rails are less critical here than on longer strokes, though the 12 mm rod diameter still handles standard operational side loads effectively.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjusting screw acts as an external stopper that lets you shorten the effective stroke from its 80 mm nominal length by up to 50 mm, creating a usable travel window of 30 to 80 mm. It functions as a travel stop and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.