
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X80-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 80 mm stroke that can be fine-tuned down by up to 75 mm, yielding a highly versatile 5 to 80 mm usable travel window.
This 32 mm bore unit uses a PT tapered port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 5 to 80 mm travel window on the fly to accommodate varying part sizes on a single line without adding external stops.
Use the 75 mm rear adjustment screw to set multiple retract positions for flexible sorting or clamping operations.
If your setup needs less force, stepping down is not an option in this series, but stepping up to a 40 mm bore provides 628 N. The adjustable stroke is ideal for dialing in exact positions at commissioning without swapping cylinders.
For stroke lengths of 300 mm or more, an external guide is recommended to handle side loads, though this 80 mm unit is compact. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for position holding, consider an external rod lock or a SAIL cylinder. This model serves as a direct ISO 15552 dimensionally interchangeable replacement.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a stopper that can trim the nominal 80 mm stroke back by up to 75 mm, giving a usable travel window of 5 to 80 mm. It requires live air to maintain position and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.