
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X80-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a PT tapered port thread. By turning the rear adjustment screw, you can trim the nominal 80 mm stroke back by up to 75 mm, creating a highly versatile 5 to 80 mm usable travel window for precise end-position tuning.
The rear stopper acts solely as a travel limiter for commissioning and product changeovers; it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact clamping distance between 5 and 80 mm during machine commissioning without adding external physical stops to the fixture.
Quickly adapt a packaging line to different package lengths by adjusting the rear screw, saving time on product format changeovers.
Limit the travel to a very short 5 mm pressing stroke for delicate electronic component placement while maintaining a standard 80 mm cylinder body.
Choose this adjustable-stroke model when your application requires frequent end-stop adjustments or variable product sizes without swapping out the entire cylinder. To replace this cylinder, match the 32 mm bore, 80 mm nominal stroke, 75 mm adjustment range, PT G1/8 port, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR footprints found on some other series. Since the usable stroke can be dialed down to just 5 mm, ensure your external guiding handles any potential side loads to prevent rod binding.
Quick checklist
The rear adjustment screw acts as a mechanical stop that can shorten the effective stroke by up to 75 mm. This means the 80 mm nominal stroke can be fine-tuned down to a 5 mm usable travel window. The adjuster only sets the end position; it does not lock or hold the load without continuous air pressure.
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.