Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke800 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10
The AirTAC SAIJ32X800-10 is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 790 to 800 mm usable travel window, allowing you to dial back the end position by up to 10 mm during commissioning without adding external stops. In the 32 mm bore class, it delivers 402 N of push force and 345 N of pull force at 0.5 MPa.
This unit features a carbon steel rod with an M10x1.25 thread and uses G1/8 ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Because the 800 mm stroke is long relative to the 12 mm rod diameter, an external guide is recommended to prevent excessive side-loading.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10 Is Used
Long-Stroke Position Tuning
Dial in the exact 790-800 mm retract endpoint on precision assembly machinery without swapping out the entire cylinder.
Product Changeover Adjustment
Quickly adapt a long-trroke conveyor diverter or pusher mechanism to new package sizes by adjusting the 10 mm travel window.
Machine Setup Calibration
Fine-tune the end stop during initial commissioning to absorb mechanical tolerance stack-ups across an 800 mm span.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10 the Right Cylinder?
Choose this adjustable-stroke model when your machine setup requires precise end-position tuning on a long 800 mm travel, whereas a fixed SAI cylinder locks you into a single hard stop. If your application needs more thrust, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa, but increases physical size. The SAIJ32X800-10 uses PT tapered port threads and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).
The rear adjuster screw acts strictly as a travel stop to set the retract position, not as a lock. It cannot hold a load without continuous live air pressure. For fail-safe load holding, consider the SAIL (air-released lock) or BSAI (clamp-lock) series, or integrate an external pilot-operated check valve. Given the 800 mm stroke, always pair this cylinder with an external linear guide to manage side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10 FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjusting screw allows you to shorten the nominal 800 mm stroke by up to 10 mm, creating a 790-800 mm travel window. It functions as a mechanical stop to fine-tune the end position and is not a lock, meaning the cylinder cannot hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.