
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X800-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 780 to 800 mm, allowing you to dial back the end position by up to 20 mm during commissioning without adding external stops.
This 32 mm bore utilizes a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It supports a speed range of 30-800 mm/s and uses a PT tapered port thread.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 780-800 mm travel end-stop to accommodate slight length variations when switching product sizes on an assembly line.
Trim the retract position by up to 20 mm during commissioning to perfectly align a tooling fixture without machining external stop blocks.
Adjust the stroke on the fly for pneumatic actuators handling diverse package dimensions, ensuring consistent positioning without cylinder swaps.
Choose this adjustable model over a fixed SAI when you need precise end-position tuning for varying product sizes on a line. Because this cylinder lacks a magnet for sensors, position detection requires external switches.
At 800 mm of stroke, the 12 mm rod is highly susceptible to side-loading and deflection; an external guide is strongly recommended to prevent premature seal wear. Remember that the rear adjuster acts only as a travel stop, not a lock; the SAIJ will not hold a load without live air pressure. For load-holding without air, consider an external rod lock or the SAIL series. To match this ISO 15552 footprint, specify a 32 mm bore, 800 mm stroke, 20 mm adjustment, PT port, and no magnet.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm, creating a 780-800 mm travel window. It fine-tunes the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.