
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X800-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 780-800 mm usable travel window, allowing you to dial back the nominal 800 mm stroke by up to 20 mm during commissioning. This variant includes a standard carbon steel piston rod and a built-in magnet for position sensing.
The rear adjuster functions strictly as a mechanical stop to fine-tune the retract end position without adding external stops, while the integrated air cushions handle deceleration. It is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. The integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 780-800 mm retract stop precisely when switching between product sizes on a packaging line, eliminating the need for physical spacer changes.
Fine-tune the end position of long-travel conveyor sorting arms by up to 20 mm to accommodate varying package dimensions at commissioning.
Set exact retraction limits for delicate material handling tasks, using the rear adjuster to prevent over-travel without complex external hardware.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning over a 780-800 mm window without swapping out the physical cylinder during product changeovers. Because the stroke is 800 mm, an external guide rail is strongly recommended to prevent excessive side-loading on the 12 mm rod and M10x1.25 rod thread.
This adjustable variant is preferred over a fixed SAI cylinder when machine setups require variable end-stops. Note that the rear adjuster and air cushions do not hold the load without live air pressure; for true load-holding without continuous supply, consider the SAIL or BSAI series. To match this ISO 15552 replacement exactly, verify the 800 mm stroke, 20 mm adjustment range, PT tapered port threads, and the -S magnet requirement.
Quick checklist
The rear adjuster acts as a mechanical stop, allowing you to shorten the 800 mm nominal stroke by up to 20 mm, creating a 780-800 mm usable travel window. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.