
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X800-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel by up to 30 mm. This yields a usable stroke window of 770-800 mm, letting you dial in the exact end position during commissioning without adding external stops. It features a carbon steel piston rod and a PT tapered G1/8 port.
The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later. The rear adjuster acts purely as a travel stop for deceleration, meaning it will not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 770 to 800 mm travel distance during initial commissioning to perfect end-of-stroke positioning.
Quickly adapt the cylinder's effective stroke on the line when switching to a different product size without swapping the whole unit.
Use the rear stopper screw to establish precise mechanical limits for delicate positioning tasks in assembly automation.
Choose this adjustable-stroke model over a fixed SAI when your machine setup requires variable end stops or frequent product changeovers. If your application needs less force, stepping down is not an option at this stroke, but stepping up to a 40 mm bore yields 528 N of pull force at 0.5 MPa. Because the 800 mm stroke is quite long for a 12 mm rod, you must use an external guide to prevent excessive side-loading and premature seal wear.
For a direct ISO 15552 replacement, match the 32 mm bore, 800 mm stroke, 30 mm adjustment, PT G1/8 port, and standard carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster is not a lock; for true fail-safe load holding without live air, consider the SAIL or BSAI series.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
The rear adjuster screw lets you shorten the 800 mm nominal stroke by up to 30 mm, creating a 770-800 mm usable travel window for fine-tuning the retract end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.