
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X800-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 800 mm stroke that can be fine-tuned backward by up to 30 mm, creating a precise 770-800 mm usable travel window.
This variant includes a standard carbon steel rod and a PT tapered port thread. It comes equipped with a magnet for position sensing, compatible with AirTAC CMSE reed and DMSE electronic solid-state switches mounted into the dual-side sensor grooves on the extruded aluminum barrel. The rear adjuster acts strictly as a mechanical stop to dial in the end position during commissioning without adding external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 770-800 mm travel window during format changeovers to accommodate varying package lengths without replacing the cylinder.
Fine-tune the retract stroke end during machine commissioning using the rear stopper to perfect the seating of delicate components.
The adjustable 770-800 mm travel window is ideal for machine changeovers where you need a variable end-stop to accommodate slight product size differences without physically swapping out a fixed-stroke SAI cylinder.
Because the nominal stroke is 800 mm, the 12 mm diameter rod and M10x1.25 thread are highly susceptible to side-loading and deflection under load; an external guide rail is strongly recommended to prevent premature seal wear. Remember that the rear adjuster and air cushions only decelerate the load; they do not hold position without live air. For true fail-safe load holding, consider an SAIL pneumatic lock or BSAI clamp-lock cylinder. This SAIJ model uses the reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
The rear mechanical stopper allows you to trim the effective stroke by up to 30 mm from the 800 mm nominal length, giving an adjustable travel window of 770-800 mm. This stopper only sets the end position; it does not lock the load without continuous air pressure.
The standard speed range for this bore size is 30-800 mm/s, and it features a PT tapered G1/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.