
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X800-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in magnet enables position sensing with CMSE reed or DMSE electronic switches. A PT tapered port thread ensures a secure pneumatic connection.
This model provides a usable travel window of 760 to 800 mm via its 40 mm adjustment range, allowing you to dial in the retract end-position at commissioning without external stops. The extruded aluminum barrel includes sensor grooves on both sides. The rear screw acts purely as a travel stop for deceleration alongside the standard air cushions, meaning it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Adjusts the retract distance on a packaging line to accommodate different box sizes without physically swapping the actuator.
Fine-tunes the 760 to 800 mm travel window during setup to perfectly time the end-of-stroke deceleration and avoid mechanical hard impacts.
Handles extended reach tasks on an assembly machine, using the rear stopper to dial in the exact 40 mm trim needed for precise component placement.
Choose this 32 mm bore when you need precise end-position tuning on a long-stroke machine; if you need more thrust, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. An adjustable stroke is preferred over a fixed SAI cylinder when product changeovers require shifting the retract distance by up to 40 mm. Because the stroke is 800 mm, the 12 mm carbon steel rod and M10x1.25 thread are susceptible to side-loading, so an external guide is mandatory to prevent rod bending.
For a true ISO 15552 replacement, match the 32 mm bore, 800 mm stroke, PT port, and -S magnet. Remember that the adjuster only sets the travel end and does not function as a lock; for load-holding without live air, consider the SAIL or BSAI series. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm, creating a usable travel window of 760 to 800 mm. It functions as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.