verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke800 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$124.45 $131.95Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50

The AirTAC SAIJ32X800-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. With a nominal 800mm stroke and a 50mm adjustment range, it yields a usable travel window of 750-800mm for precise end-position tuning at commissioning.

This model incorporates a 12mm carbon steel rod and a 27mm cushion. The rear adjuster acts purely as a travel stop to fine-tune the retract end without adding external stops. It is dimensionally interchangeable with ISO 15552 cylinders and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X800-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke800 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50 Is Used

tune

End-Position Tuning

Dial in the exact retract distance within the 750-800mm window during machine commissioning without installing external physical stops.

settings_input_component

Product Changeover

Quickly adapt the cylinder travel for different product sizes on a conveyor line by adjusting the rear stopper screw.

precision_manufacturing

Assembly Calibration

Fine-tune the approach distance of a 402N tool to ensure precise alignment during automated assembly processes.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50 the Right Cylinder?

The adjustable stroke is ideal for machine setup and product changeover, allowing you to dial back the travel by up to 50mm without swapping the cylinder. Because the stroke is 800mm, an external guide is recommended to handle side loads and prevent rod wear.

For an ISO 15552 replacement, match the 32mm bore, 800mm stroke, 50mm adjuster, PT G1/8 port, and the reduced SAIJ mounting set. Note that the rear adjuster only sets the travel end; it does not hold the load without live air. For load-holding without pressure, consider the SAIL or BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50 FAQ

The rear adjuster acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 800mm down to 750mm. It sets the end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X800-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.