
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X800-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for position detection.
Because the 800 mm stroke is highly extended relative to the 12 mm rod diameter, an external guide is strongly recommended to prevent side-load damage. The rear adjuster acts purely as a mechanical stop to set the travel end; it does not lock the load or hold position without live air pressure. For load-holding requirements, consider an external rod lock or the AirTAC SAIL series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 725-800 mm travel end during initial commissioning to perfectly align long-stroke clamping or lifting mechanisms without machining custom spacers.
Quickly adapt a long-trroke pusher mechanism to accommodate varying product lengths on a production line by simply turning the rear 75 mm adjustment screw.
Dial in the exact retraction point for delicate placement tasks, using the rear stopper to mechanically decelerate the load rather than relying solely on the air cushion.
Choose this 32 mm bore model when you need precise end-position tuning on a long-stroke machine without fabricating external physical stops. Conversely, if the 725-800 mm window is excessive, a shorter base stroke with a smaller adjustment code offers a more compact footprint.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 800 mm stroke, PT tapered port threads, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. Due to the 800 mm stroke, always support the load with an external guide to protect the rod and seals.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective travel from 800 mm down to 725 mm. It sets the end position but does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.