verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke85 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$66.03 $73.53Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S

The AirTAC SAIJ32X85-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 85 mm stroke that can be dialed back by up to 10 mm, creating a 75-85 mm usable travel window for precise end-position tuning at commissioning.

Equipped with a magnet for position sensing, this version works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted into the dual-side sensor grooves. The carbon steel piston rod features an M10x1.25 thread, and the unit integrates adjustable air cushions at both ends to decelerate the moving load smoothly.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S Is Used

precision_manufacturing

End-Stop Trimming

Fine-tunes the exact retraction point within the 75-85 mm window during machine commissioning to perfect part ejection.

tune

Product Changeovers

Quickly dials back the stroke by a few millimeters on packaging lines when switching to a slightly shorter product format.

settings_input_component

Sensor Calibration

Leverages the built-in magnet and DMSE electronic sensors to confirm position changes after adjusting the rear stopper.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S the Right Cylinder?

Choose this 32 mm bore adjustable cylinder when your application requires exact end-stop calibration without adding external stops or swapping out the actuator. Conversely, if you need a fixed travel and can eliminate the adjustment mechanism entirely, the standard AirTAC SAI series is a simpler alternative.

For replacement, match the 32 mm bore, 85 mm stroke, 10 mm adjustment range, PT tapered port threads, and the -S magnet option. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure. For fail-safe load holding, consider the AirTAC SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S FAQ

It features a rear adjusting screw that allows you to shorten the effective stroke by up to 10 mm. This creates a 75-85 mm adjustable travel window, letting you set the exact end position at commissioning without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X85-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.