verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke85 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$65.43 $73.53Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S

The AirTAC SAIJ32X85-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 85 mm stroke that can be fine-tuned down by up to 20 mm, yielding a precise 65-85 mm usable travel window.

This variant includes a magnet for position sensing and uses a carbon steel rod with a PT tapered port thread. The rear adjuster acts purely as a mechanical stop for end-position tuning at commissioning; it is not a lock, so load-holding without live air requires an external rod lock or a SAIL cylinder. Mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S Is Used

tune

End-Stop Calibration

Dial in the exact 65-85 mm travel distance during machine commissioning to perfect part seating without machining hard stops.

settings_input_component

Product Changeover

Quickly adjust the rear screw to accommodate slight variations in incoming material lengths on a high-mix assembly line.

precision_manufacturing

Precise Ejection

Trim the retract stroke by up to 20 mm to tune the ejection arc of small components, preventing overshoot into downstream conveyors.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S the Right Cylinder?

Select this 32 mm bore when an application demands exact end-position tuning without swapping cylinders or adding external stops. If your setup requires greater thrust, stepping up to the 40 mm bore increases push force to 628 N at 0.5 MPa. The integrated magnet enables direct mounting of AirTAC CMSE reed or DMSE electronic sensors along the dual-side barrel grooves.

For ISO 15552 interchangeability, match the 32 mm bore, 85 mm stroke, 20 mm adjustment range, PT G1/8 port, and the -S magnet requirement. The 12 mm rod and M10x1.25 thread handle moderate side loads, but always verify guiding on longer strokes. Note that SAIJ omits FB, CA, CB, and CR mounts.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S FAQ

The rear mechanical adjuster allows you to shorten the 85 mm nominal stroke by up to 20 mm, creating a 65-85 mm usable travel window. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X85-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.