
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X85-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the effective travel window down to a 55-85 mm range without adding external stops. In its standard configuration, it features a carbon steel piston rod, PT tapered ports, and a magnetic piston ready for position sensing.
Because the rear adjuster acts purely as a mechanical stop, it does not lock the load or hold position without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. This extruded aluminum profile cylinder includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 55 to 85 mm end-stop position on packaging lines when switching between slightly different carton sizes without swapping hardware.
Precisely set the retract distance during machine commissioning to guarantee delicate parts are pressed together accurately without over-travel.
Leverage the magnetic piston with DMSE electronic sensors to verify multiple intermediate positions while adjusting the travel window for lab testing rigs.
Selecting the SAIJ32X85-30-S is ideal when a machine requires precise end-position tuning during commissioning or frequent product changeovers, bypassing the need to physically swap out a fixed-stroke SAI cylinder. To match this SKU exactly as an ISO 15552 replacement, specify the 32 mm bore, 85 mm nominal stroke, 30 mm adjustment range, PT ports, the desired mounting style, and the -S magnet option.
With an 85 mm stroke, the 12 mm diameter rod and M10x1.25 thread handle moderate side loads, but any off-center load should still be guided externally to prevent premature seal wear.
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the effective travel. For this model, you can trim the 85 mm nominal stroke back by up to 30 mm, creating a usable 55-85 mm travel window. It only sets the end position and does not lock the load without continuous air pressure.
The standard speed range is 30-800 mm/s, supported by adjustable air cushions at both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.