
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X85-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 85 mm stroke that can be dialed back by up to 50 mm, giving you a usable travel window of 35 to 85 mm.
This adjustable stopper allows precise end-position tuning during commissioning without swapping the cylinder. It uses a standard PT tapered port (G1/8) and a 12 mm carbon steel rod. The adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 35-85 mm travel window on the fly to accommodate different product lengths without changing out the entire cylinder assembly.
Fine-tune the retract end-position during initial commissioning to find the exact 35 mm to 85 mm stroke needed before finalizing a design.
Replace hard external stops with the integrated rear adjuster to cleanly manage varying push distances on a compact 32 mm bore assembly.
If you need less force, stepping down is not an option in the SAIJ range, but stepping up to a 40 mm bore yields 628 N. The generous 50 mm adjustment window on an 85 mm stroke is perfect for prototyping or machines handling multiple part sizes, whereas a fixed SAI cylinder is better for dedicated, single-purpose stations.
To match this ISO 15552 cylinder, confirm the 32 mm bore, 85 mm stroke, 50 mm adjustment, PT G1/8 port, and carbon steel rod. Because it lacks a magnet, it does not support CMSE or DMSE sensors. Remember that the rear adjuster is not a lock; for load-holding without live air, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 50 mm. This turns the standard 85 mm stroke into an adjustable 35-85 mm travel window, allowing you to set the exact retract position without adding external stops.
At 0.9 MPa, the push force increases to 724 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.