verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke85 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$66.03 $73.53Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S

The AirTAC SAIJ32X85-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel rod and a PT tapered port thread. Because it carries the -S option, it includes a magnet for position sensing using AirTAC CMSE reed or DMSE electronic switches mounted in the dual-side sensor grooves.

With a nominal 85 mm stroke and a 50 mm adjustment range, you can dial the effective travel down to anywhere between 35 mm and 85 mm during commissioning. The rear stopper simply acts as a travel end for fine-tuning; it is not a lock, so load-holding without live air requires a SAIL or BSAI variant.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S Is Used

tune

Product Changeovers

Dial in the 35-85 mm travel window on packaging lines to accommodate different carton sizes without physically swapping the actuator.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract position during machine setup to perfectly seat delicate parts, using the rear screw rather than adding external stops.

settings_input_component

Sensor-Driven Sorting

Leverage the -S magnet with DMSE electronic sensors to confirm positioning while adjusting the stroke for varying product formats on a conveyor.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S the Right Cylinder?

Choose this 32 mm bore when you need precise end-position tuning without swapping cylinders, as the 50 mm adjuster provides a wide 35-85 mm usable travel window for product-size changeovers.

This model is dimensionally interchangeable per ISO 15552. To match it exactly for a replacement, verify the 85 mm stroke, 50 mm adjustment, PT port thread, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. For fixed travel without the adjuster, a standard SAI cylinder is the alternative.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S FAQ

The rear adjuster acts as a mechanical stop that lets you trim the effective travel from the 85 mm nominal stroke down to as little as 35 mm. It only sets the end position and does not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X85-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.