verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke85 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$63.24 $70.74Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75

The AirTAC SAIJ32X85-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 10-85 mm window. This compact 32 mm bore design provides variable air cushions at both ends to precisely control deceleration.

Because the rear screw acts as a physical stop rather than a locking mechanism, it cannot hold a load without continuous live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily add CMSE reed or DMSE electronic switches if position feedback is later required.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X85-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75 Is Used

tune

Machine Changeover

Dial in the 10-85 mm travel window during product size changes to set new end positions rapidly without replacing the cylinder.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract position at commissioning using the rear adjuster to achieve precise placement without external stops.

settings_input_component

Variable Positioning

Adjust the physical travel limit on the fly for flexible positioning tasks in compact assembly fixtures.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75 the Right Cylinder?

Choose this 32 mm bore adjustable cylinder when your application requires exact end-position tuning during commissioning without the need to physically swap out components or add external stops. If your setup demands greater thrust, stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. Conversely, if you need a fixed end-of-stroke and do not anticipate product changeovers, a standard SAI cylinder provides a simpler setup.

For exact ISO 15552 dimensional interchangeability, match the 32 mm bore, 85 mm nominal stroke, 75 mm adjustment range, PT port thread, and carbon steel rod. Remember that the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR brackets. For applications requiring the load to be held mechanically without air pressure, consider an AirTAC SAIL or BSAI cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75 FAQ

The rear adjuster screw acts as a mechanical stop, allowing you to reduce the nominal 85 mm stroke down to a minimum of 10 mm, creating a 10-85 mm usable travel window. It only sets the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X85-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.