
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X85-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 85 mm stroke that can be dialed back by up to 75 mm, yielding a highly versatile 10-85 mm usable travel window.
This variant includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, and features a standard carbon steel rod with PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the end-stop between 10 and 85 mm when switching a packaging line to accommodate different carton depths without changing tooling.
Fine-tune the retract position during machine setup to perfectly seat delicate 32 mm bore components without over-traveling.
Dial in the exact clamping depth on test fixtures where the required stroke changes based on the specific prototype part being evaluated.
If your application requires less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore increases push force to 628 N. The SAIJ32X85-75-S is selected over a fixed-stroke SAI when a line handles multiple product sizes, allowing operators to dial in the exact 10-85 mm end-stop without swapping cylinders or adding external stops.
Because the stroke is under 300 mm, side-load stress on the 12 mm rod is manageable without external guides for typical loads. Remember that the rear adjuster is a travel stop, not a lock; if you need to hold a load vertically without continuous air pressure, specify an AirTAC SAIL or BSAI cylinder instead. This model uses a PT tapered port thread and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
At a maximum 1.0 MPa pressure, it achieves 82 kgf of push force.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 85 mm down to as little as 10 mm. This creates a 10-85 mm usable window for fine-tuning end positions at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.