verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X850-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke850 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$133.96 $141.46Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100

The AirTAC SAIJ32X850-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 750-850 mm, letting you dial back the 850 mm nominal stroke by up to 100 mm during commissioning.

This variant uses a standard carbon steel rod with a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic sensors directly if a magnet is added later. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not lock the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X850-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke850 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×850Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100 Is Used

settings_input_component

Machine Setup Changeover

Dial in the exact 750 to 850 mm retract position during product line changeovers without adding external physical stops.

conveyor_belt

Variable End-Stop Positioning

Adjust the end-of-stroke stopper on the fly to accommodate varying package sizes moving down a conveyor system.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100 the Right Cylinder?

Choose this 32 mm bore when you need precise variable end-stops for product changeovers, avoiding the need to physically swap a fixed-stroke SAI cylinder. Conversely, this 32 mm bore is the smallest in the range, offering 345 N of pull force at 0.5 MPa for compact setups.

Because the 850 mm stroke is long, the 12 mm rod requires an external guide to prevent excessive side-loading and buckling. Remember that the rear adjuster and air cushions only decelerate the travel end; they do not hold the load. For true fail-safe load holding without live air, select a SAIL (air-released lock) or BSAI (clamp-lock) cylinder. This SAIJ model supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting interfaces, omitting FB, CA, CB, and CR.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100 FAQ

The rear adjusting screw lets you shorten the effective stroke by up to 100 mm, providing a usable travel window of 750-850 mm. This allows fine-tuning of the end position at commissioning without swapping the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X850-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.